document number: 93562 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 17-jun-08 1 single phase rectifier bridge, 2 a 2kbp series vishay high power products features ? suitable for printed circuit board mounting ? compact construction ? high surge current capability ? rohs compliant description a 2 a single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. they are intended for general applications in industrial and consumer equipment. electrical specifications product summary i o 2 a v rrm 50 to 1000 v d-44 rohs compliant major ratings and characteristics symbol characteristics values units i o 2.0 a i fsm 50 hz 60 a 60 hz 63 i 2 t 50 hz 18 a 2 s 60 hz 16 v rrm 50 to 1000 v t j - 40 to 150 c voltage ratings part number v rrm , maximum repetitive peak reverse voltage (v) v rsm , maximum non-repetitive peak reverse voltage (v) v rms , maximum recommended rms supply voltage (v) 2kbp005 50 50 20 2kbp02 200 200 80 2kbp04 400 400 125 2kbp06 600 600 250 2kbp08 800 800 380 2kbp10 1000 1000 500
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93562 2 revision: 17-jun-08 2kbp series vishay high power products single phase rectifier bridge, 2 a fig. 1 - ambient temperature ratings fig. 2 - non-repetitive surge ratings forward conduction parameter symbol test conditions values units maximum dc output current i o t a = 50 c, resistive or inductive load 2.0 a t a = 50 c, capacitive load 1.8 maximum peak one cycle, non-repetitive surge current i fsm t = 10 ms, 20 ms following any rated load condition and with rated v rrm reapplied 60 a t = 8.3 ms, 16.7 ms 63 maximum i 2 t capability for fusing i 2 t t = 10 ms 100 % v rrm reapplied initial t j = t j maximum 18 a 2 s t = 8.3 ms 16 t = 10 ms no voltage reapplied 26 t = 8.3 ms 23 maximum i 2 t capability for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 255 a 2 s maximum peak forward voltage per diode v fm i fm = 1 a, t j = 25 c 1.0 v typical peak reverse leakage current per diode i rm t j = 25 c, 100 % v rrm 10 a t j = 150 c, 100 % v rrm 1.0 ma operating frequency range f 40 to 1000 hz thermal and mechanical specifications parameter symbol values units operating junction and storage temperature range t j , t stg - 40 to 150 c approximate weight 4g 0.14 oz. 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 1. 8 2.0 2.2 0 0 204060 8 0 100 120 140 160 avera g e output current (a) maximum allowable ambient temperature (c) capaciti v e load resisti v e, ind u cti v e load maximum peak output current (a) pulse train duration (s) 50 40 30 20 10 0 10 -2 10 -1 110 60 70 from any rated load condition
document number: 93562 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 17-jun-08 3 2kbp series single phase rectifier bridge, 2 a vishay high power products circuit configuration + - ~ ~ i o links to related documents dimensions http://www.vishay.com/doc?95329
document number: 95329 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 04-jul-08 1 d-44 outline dimensions vishay semiconductors dimensions in millimeters (inches) 3.8 (0.15) 3.8 (0.15) 3.8 (0.15) 6.8 (0.27) ? 0.75 (0.030) +~ ~- 17.5 (0.69) 22 (0.87) 15 (0.59)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
